-40%
150MM (6in) DIGITAL CALIPER WITH 3 BUTTONS
$ 20.59
- Description
- Size Guide
Description
Zero setting at any position, easy to take relative measurements.Metric/Inch system interchange at any position.
With data output interface (optional), data can be input to a special printer or a computer via special cable for data processing and printing.
Interface Type: Synchronous serial.
Data: Binary code, 24bits. Each datum will be transferred twice. The cycle is 300ms(20ms in fast reading state).
Transmitting time: 0.5ms.
Four wires(from left to right): Negative power(-), Clock pulse CP, Data D, positive Power(+).
Pulse range of data:"0" Level <0.2V, Level "1">1.3V.
Clock Pulse CP: 90KHz. effective for high electrical level.
Special function: With data holding, fast display, fast tracingMaximum and Minimum value during measurements, conversion between relative and absolute measurement and tolerance zone setting.
Comes with case and battery.